{"title":"Home page","description":null,"products":[{"product_id":"rotax-replica-tool-976740-for-oil-spray-nozzle-flow-check","title":"Rotax Replica Tool 976740 for Oil Spray Nozzle Flow Check","description":"\u003cp\u003eThis is a high-quality 3D printed version of the hard-to-get-your-hands-on tool required to complete the flow test prescribed in Rotax ASB-912 i-016 R1 \/ ASB-915 i-016 R1 \/ ASB-916 i-006 R1 (revision of SB-912 i-016 \/ SB-915 i-016 \/ SB-916 i-006).\u003c\/p\u003e\n\u003cp\u003e* Note, some images show the old-style replica with the small hose barb exiting the rear of the tool.  This version, like the original, requires a greater clearance between the rear of the iS engine and the firewall.  \u003cstrong\u003eThe current version sold here has been modified for a standard 1\/4\" hose barb exiting the side\u003c\/strong\u003e, eliminating about 2\" - 5\" of required clearance for use.\u003c\/p\u003e\n\u003cp\u003e** There is an embedded o-ring in the orifice.  \u003cstrong\u003eIt is a good idea to lubricate the o-ring with a drop of engine oil before use.  The polymer is safe for fuel and oil contact\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e*** To use this tool, you will need to build a testing device, complete with a pneumatic flow meter, a pneumatic pressure regulator capable of controlling pressure to 300 mbar\/4.35 psi, and a shut-off valve.  Be sure to regulate the pressure before opening the valve to this tool.  It has been tested to the test pressure (300 mbar\/4.35 psi).  Specifications and parts required for building the test rig can be found in the Rotax ASB\/SB noted above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer and Limitation of Liability\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eUse at Your Own Risk\u003c\/strong\u003e: This tool is provided as-is and is intended for use as an engine testing tool. The buyer assumes all risk and responsibility for the proper use and maintenance of this tool.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNo Warranty\u003c\/strong\u003e: This product is sold without any express or implied warranties, including but not limited to the warranties of merchantability, fitness for a particular purpose, or non-infringement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLimitation of Liability\u003c\/strong\u003e: Under no circumstances shall Omnav Aviation, LLC be liable for any direct, indirect, incidental, special, or consequential damages arising from the use or inability to use this product, even if Omnav Aviation, LLC has been advised of the possibility of such damages.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIndemnification\u003c\/strong\u003e: The buyer agrees to indemnify, defend, and hold harmless Omnav Aviation, LLC, its officers, directors, employees, and affiliates from any claims, liabilities, damages, and expenses (including reasonable attorneys' fees) arising from the use of this product.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIntended Use\u003c\/strong\u003e: This product is designed for testing Rotax iS oil spray nozzle flow rate per Rotax ASB-912 i-016 R1 \/ ASB-915 i-016 R1 \/ ASB-916 i-006 R1. Any use of the product outside of its intended purpose is at the buyer's own risk and may void any applicable warranties or return policies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance with Laws\u003c\/strong\u003e: The buyer is responsible for ensuring that the use of this product complies with all applicable laws, regulations, and safety standards.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Omnav Aviation, LLC","offers":[{"title":"Default Title","offer_id":51863293853987,"sku":"","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3565\/2643\/files\/20250107_210729.jpg?v=1741374102"},{"product_id":"rotax-replica-tool-976740-stl-file-digital-download","title":"Rotax Replica Tool 976740 - STL File (Digital Download)","description":"\u003cp\u003eThis is an STL file for printing the tool, along with printing instructions.  It is for those that have access to 3D printing to fabricate the tool themselves.\u003c\/p\u003e\n\u003cp\u003eThe files are compressed into a single ZIP file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis information and the STL are the property of Omnav Aviation.  Purchase and download of the STL grants the purchaser unlimited use of the STL for production of the tool for their use only.  The STL file, any variants or derivations based on it, and the instructions are not to be shared with others who have not purchased the rights to use it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a high-quality 3D printed version of the hard-to-get-your-hands-on tool required to complete the flow test prescribed in Rotax ASB-912 i-016 R1 \/ ASB-915 i-016 R1 \/ ASB-916 i-006 R1 (revision of SB-912 i-016 \/ SB-915 i-016 \/ SB-916 i-006).\u003c\/p\u003e\n\u003cp\u003e* Note, some images below show the old-style replica with the small hose barb exiting the rear of the tool.  This version, like the original, requires a greater clearance between the rear of the iS engine and the firewall.  \u003cstrong\u003eThe current version sold here has been modified for a standard 1\/4\" hose barb exiting the side\u003c\/strong\u003e, eliminating about 2\" - 5\" of required clearance for use.\u003c\/p\u003e\n\u003cp\u003e** Also note, these are practically identical to the original Rotax tool with regard to external dimensions.  \u003cstrong\u003eIt is a good idea to lubricate the o-ring with a drop of engine oil before use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e*** To use this tool, you will need to build a testing device, complete with a pneumatic flow meter, a pneumatic pressure regulator capable of controlling pressure to 300 mbar\/4.35 psi, and a shut-off valve.  Be sure to regulate the pressure before opening the valve to this tool.  It has been tested to the test pressure (300 mbar\/4.35 psi), but not for higher pressures.  Specifications and parts required for building the test rig can be found in the Rotax ASB\/SB noted above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer and Limitation of Liability\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eUse at Your Own Risk\u003c\/strong\u003e: This tool is provided as-is and is intended for use as an engine testing tool. The buyer assumes all risk and responsibility for the proper use and maintenance of this tool.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNo Warranty\u003c\/strong\u003e: This product is sold without any express or implied warranties, including but not limited to the warranties of merchantability, fitness for a particular purpose, or non-infringement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLimitation of Liability\u003c\/strong\u003e: Under no circumstances shall Omnav Aviation, LLC be liable for any direct, indirect, incidental, special, or consequential damages arising from the use or inability to use this product, even if Omnav Aviation, LLC has been advised of the possibility of such damages.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIndemnification\u003c\/strong\u003e: The buyer agrees to indemnify, defend, and hold harmless Omnav Aviation, LLC, its officers, directors, employees, and affiliates from any claims, liabilities, damages, and expenses (including reasonable attorneys' fees) arising from the use of this product.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIntended Use\u003c\/strong\u003e: This product is designed for testing Rotax iS oil spray nozzle flow rate per Rotax ASB-912 i-016 R1 \/ ASB-915 i-016 R1 \/ ASB-916 i-006 R1. Any use of the product outside of its intended purpose is at the buyer's own risk and may void any applicable warranties or return policies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance with Laws\u003c\/strong\u003e: The buyer is responsible for ensuring that the use of this product complies with all applicable laws, regulations, and safety standards.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Custom Rotax Tools and Parts","offers":[{"title":"Default Title","offer_id":51890317459747,"sku":"","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3565\/2643\/files\/2025-01-0721.07.29-STL.jpg?v=1736390661"},{"product_id":"rotax-replica-tool-976740-cnc-step-files-digital-download","title":"Rotax Replica Tool 976740 - CNC STEP Files (Digital Download)","description":"\u003cp\u003eIncluded are STEP files and instructions for fabricating these tools using CNC machining.\u003c\/p\u003e\n\u003cp\u003eThe files are compressed into a single ZIP file.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in;\"\u003e\u003cb\u003eThis information and the STEP files and instructions are the property of Omnav Aviation.  Purchase and download of the STEP files and instructions grants the purchaser unlimited use of the STEP files for production of the tool for their use only.  The STEP files, any variants or derivations based on it, and the instructions are not to be shared with others who have not purchased the rights to use it.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in;\"\u003eThese are dimensionally accurate 3D models of the original Rotax 976740 tool required to complete the flow test prescribed in Rotax ASB-912 i-016 R1 \/ ASB-915 i-016 R1 \/ ASB-916 i-006 R1 (revision of SB-912 i-016 \/ SB-915 i-016 \/ SB-916 i-006).\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in;\"\u003eThis replica tool is virtually dimensionally identical to the original tool, including the placement and depth of the orifice and o-ring.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in;\"\u003eThere are two parts, the body and the cap.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThey can be cut from any machinable aluminum.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eAn O-ring is placed in the orifice in the body, and the cap is placed atop it and retained with 2 countersunk machine screws.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThe original tool has a rear exiting hose barb that is a Rotax part, 940551.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis hole is tapped for an M6 x 1 thread.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in;\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt is a good idea to lubricate the o-ring with a drop of engine oil before use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in;\"\u003eTo use this tool, you will need to build a testing device, complete with a pneumatic flow meter, a pneumatic pressure regulator capable of controlling pressure to 300 mbar\/4.35 psi, and a shut-off valve.  \u003cb\u003eBe sure to regulate the pressure before opening the valve to this tool.\u003c\/b\u003e  Specifications and parts required for building the test rig can be found in the Rotax ASB\/SB noted above.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in;\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer and Limitation of Liability\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003col style=\"margin-top: 0in;\" start=\"1\" type=\"1\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0in; mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003e\n\u003cb\u003eUse at Your Own Risk\u003c\/b\u003e: These 3D models and instructions are provided as-is and are intended for use to fabricate an engine testing tool. The buyer assumes all risk and responsibility for the proper use of this information.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0in; mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003e\n\u003cb\u003eNo Warranty\u003c\/b\u003e: This product is sold without any express or implied warranties, including but not limited to the warranties of merchantability, fitness for a particular purpose, or non-infringement.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0in; mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003e\n\u003cb\u003eLimitation of Liability\u003c\/b\u003e: Under no circumstances shall Omnav Aviation, LLC be liable for any direct, indirect, incidental, special, or consequential damages arising from the use or inability to use this product, even if Omnav Aviation, LLC has been advised of the possibility of such damages.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0in; mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003e\n\u003cb\u003eIndemnification\u003c\/b\u003e: The buyer agrees to indemnify, defend, and hold harmless Omnav Aviation, LLC, its officers, directors, employees, and affiliates from any claims, liabilities, damages, and expenses (including reasonable attorneys' fees) arising from the use of this product.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0in; mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003e\n\u003cb\u003eIntended Use\u003c\/b\u003e: This product is designed for testing Rotax iS oil spray nozzle flow rate per Rotax ASB-912 i-016 R1 \/ ASB-915 i-016 R1 \/ ASB-916 i-006 R1. Any use of the product outside of its intended purpose is at the buyer's own risk and may void any applicable warranties or return policies.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0in; mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003e\n\u003cb\u003eCompliance with Laws\u003c\/b\u003e: The buyer is responsible for ensuring that the use of this product complies with all applicable laws, regulations, and safety standards.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Custom Rotax Tools and Parts","offers":[{"title":"Default Title","offer_id":52159531647267,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3565\/2643\/files\/2025-01-0222.46.13-STEP.jpg?v=1737254866"},{"product_id":"rotax-mini-replica-tool-976740-for-oil-spray-nozzle-flow-check","title":"MINI - Rotax Replica Tool 976740 for Oil Spray Nozzle Flow Check","description":"\u003cp\u003e\u003cstrong\u003eThe MINI Version\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have a very tight install, this tool may just help you get your Oil Spray Nozzle Flow Test completed without engine removal, or partial removal.  Overall length is 3-3\/8\" (87mm), which is 3\/4\" (17mm) shorter than the full-size tool and 1.3\" (33mm) less than the original Rotax tool.  The Rotax tool also has the hose barb exiting the end of the tool, requiring another 2\"+ for hose clearance.\u003c\/p\u003e\n\u003cp\u003e*Note,\u003cstrong\u003e if you have the space, get the standard tool.\u003c\/strong\u003e  It is easier to use even when there's \"just enough\" space to use it.  Most installs will use the standard tool.  The RV-12i, for example, appears to be tight, but the standard tool works just fine on that installation.\u003c\/p\u003e\n\u003cp\u003e**Note, \u003cstrong\u003eThis tool may not work for some 915is and 916is engines.\u003c\/strong\u003e  I suggest getting the standard tool for these engines, and if after trying you find you cannot make it fit, message me.\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed version of the hard-to-get-your-hands-on tool required to complete the flow test prescribed in Rotax ASB-912 i-016 R1 \/ ASB-915 i-016 R1 \/ ASB-916 i-006 R1 (revision of SB-912 i-016 \/ SB-915 i-016 \/ SB-916 i-006).\u003c\/p\u003e\n\u003cp\u003e* Note, some images show the old-style replica with the small hose barb exiting the rear of the tool.  This version, like the original, requires a greater clearance between the rear of the iS engine and the firewall.  \u003cstrong\u003eThe current version sold here has been modified for a standard 1\/4\" hose barb exiting the side\u003c\/strong\u003e, eliminating about 2\" - 5\" of required clearance for use.\u003c\/p\u003e\n\u003cp\u003e** There is an embedded o-ring in the orifice.  \u003cstrong\u003eIt is a good idea to lubricate the o-ring with a drop of engine oil before use.  The polymer is safe for fuel and oil contact\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e*** To use this tool, you will need to build a testing device, complete with a pneumatic flow meter, a pneumatic pressure regulator capable of controlling pressure to 300 mbar\/4.35 psi, and a shut-off valve.  Be sure to regulate the pressure before opening the valve to this tool.  It has been tested to the test pressure (300 mbar\/4.35 psi).  Specifications and parts required for building the test rig can be found in the Rotax ASB\/SB noted above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer and Limitation of Liability\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eUse at Your Own Risk\u003c\/strong\u003e: This tool is provided as-is and is intended for use as an engine testing tool. The buyer assumes all risk and responsibility for the proper use and maintenance of this tool.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNo Warranty\u003c\/strong\u003e: This product is sold without any express or implied warranties, including but not limited to the warranties of merchantability, fitness for a particular purpose, or non-infringement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLimitation of Liability\u003c\/strong\u003e: Under no circumstances shall Omnav Aviation, LLC be liable for any direct, indirect, incidental, special, or consequential damages arising from the use or inability to use this product, even if Omnav Aviation, LLC has been advised of the possibility of such damages.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIndemnification\u003c\/strong\u003e: The buyer agrees to indemnify, defend, and hold harmless Omnav Aviation, LLC, its officers, directors, employees, and affiliates from any claims, liabilities, damages, and expenses (including reasonable attorneys' fees) arising from the use of this product.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIntended Use\u003c\/strong\u003e: This product is designed for testing Rotax iS oil spray nozzle flow rate per Rotax ASB-912 i-016 R1 \/ ASB-915 i-016 R1 \/ ASB-916 i-006 R1. Any use of the product outside of its intended purpose is at the buyer's own risk and may void any applicable warranties or return policies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance with Laws\u003c\/strong\u003e: The buyer is responsible for ensuring that the use of this product complies with all applicable laws, regulations, and safety standards.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Omnav Aviation, LLC","offers":[{"title":"Default Title","offer_id":52471986356515,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3565\/2643\/files\/2025-01-31_21.51.10.jpg?v=1741374102"},{"product_id":"912is-stator-puller-rental","title":"912iS Stator Puller 876010 - rental","description":"\u003cp\u003eThe tool required to pull and install the stator housing on a 912 iS\u003c\/p\u003e","brand":"Omnav Aviation, LLC","offers":[{"title":"Default Title","offer_id":52781223575843,"sku":"","price":50.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0925\/3565\/2643\/files\/Screenshot2025-02-17170243.png?v=1739833488"}],"url":"https:\/\/nd02u5-1f.myshopify.com\/collections\/frontpage.oembed","provider":"Omnav Aviation Custom Rotax Tools and Parts","version":"1.0","type":"link"}